Intelligent cartoning machine (with hook)

Category

Intelligent Box Packing Machine Series

Keywords

Consultation

Products Describe

I.Description of equipment：

Manually put the product into the box machine for conveying---Detector eye detects the income material--- Boxes are automatically forming--Hook automatic folding and forming - left side page automatic folding and forming - product automatic pushing material into the box - right side page automatic folding and forming - left and right large folding page automatic folding and forming - finished product conveyor belt will folded carton conveyor out of the equipment - finished!

II.Main equipment technical parameters：

2.1 Parameter data：

NO	Equipment Name	RY-Small80-Z3	Remark
1	Packing speed	30-60boxes/min	Depend on product
2	Carton size	L70-165×W35-80×H25-80mm
3	Motor power	1.5KW
4	Power supply type	220V 50/60Hz
5	Suitable packaging materials	grey card paper, white card paper, corrugated paper
6	Air source	0.6-0.8 Mpa
7	Overall dimension	about290014001700
8	Overall Weight	about1100kg

2.2Intelligent Cartoning Machine Configuration Information：

NO	Name	Brand	Remarks
1	PLC	Delta
2	Touch screen	Delta
3	Frequency converter	Delta
4	Detector eye	Omron
5	Switching power supply	Mean Well
6	Breaker	Schneider
7	Button	Schneider
8	contactors	Schneider
9	Relay Modules	Omron
10	pneumatic elements	Adecco/SMC/China
11	Linear slides	Dinghan
12	Motor	Dongbang

Carton requirement

NO	Content		Remark
1	The carton is shared as shown L\W\H		Picture 1
2	Cartons need to meet > 120 degrees pre-folding before gluing, and no adhesive after gluing; Indentation to the deepest
3	Corrugated box grain for vertical grain; Gray card, white card box grain for horizontal grain
4	The left and right side pages need to be left with a paper thickness gap after moulding.		Picture 2
5	The chamfering radius of both ends of the inserted tongue of the carton large folding page is equal to the width of the inserted tongue plus 2mm, and the chamfering does not leave a straight edge after production.		Picture 3
6	(1) It is recommended that the width of the folding leaf of the aircraft hole is the width of the carton minus 2mm (i.e., 1mm gap is reserved on both sides) (2) Requirements for aircraft hole on both sides (X) at least 8mm gap reserved (3) aircraft hole in the folding leaf P ≤ (W - 2) (4) as shown in the figure, the aircraft hole folding leaves need to rise 1mm as a whole, so that the aircraft hole folding leaves in the equipment to run the folding moulding guide output, to avoid damage to the aircraft hole.		Picture 4
7	Carton layout with aeroplane holes as shown		Picture 5
As shown
Picture 1	Picture 2		Picture 3
Picture 4		Picture 5
Summary: The above is the carton automation process requirements; according to the above process requirements and provide qualified samples to our technology for confirmation shall prevail; the final process to the equipment acceptance shall prevail (package storage place, the paper can not be damp, and the incoming material is neat and not deformed).

PRE

Mini Cartoning Machine

Intelligent cartoning machine (with inner tray)