Intelligent cartoning machine (with finished product manual)

Category

Intelligent Box Packing Machine Series

Keywords

Consultation

Products Describe

Equipment scheme description：

Manually placed products--Detection photoelectric detect the product--Automatic box forming--Finished product instruction book/certificate of conformity (one of two options) automatic feeding into the box--Left page automatic folding molding--Push the material into the box automatically--Right page automatic folding molding--Large folding automatic folding forming--output--finish

Main equipment technical parameters

2.1 Parameter data：

NO.	Type	RY-Small80-Z5	Remark
1	Speed	30-50 box/min	Depends on the product
2	Carton size	L70-165×W35-80×H25-80mm	Size is for reference only, need to provide specific samples to judge before accepting orders
3	Motor power	1.5KW
4	Power supply	220V 50/60Hz
5	Paper	gray cardboard, white cardboard, corrugated paper
6	Air source	0.6-0.8 Mpa
7	Overall dimension	about 290014001700
8	Weight	about 1100kg

（Rongyu reserves the power of final interpretation）

2.2 Configuration information：

No.	Name	Brand	Remark
1	PLC	DELTA
2	Touch screen	DELTA
3	Frequency converter	DELTA
4	Detector	OMRON
5	Switching power supply	MEAN WELL
6	Breaker	SCHNEIDER
7	Button	SCHNEIDER
8	Contactor	SCHNEIDER
9	Relay	OMRON
10	Pneumatic element	AirTAC/SMC/Made in China
11	linear slide guide rail	SHAC
12	Motor	DPG

Requirements for the cartoning and packaging process

Carton Requirements
NO.	Content	Remark
1	L\W\H refer to picture	Figure 1
2	Pre-folding more than 120 degrees before the carton adhesion, and after bonding shall not be adhesive again; Indentation to the deepest
3	Corrugated box grain for vertical grain; Gray card, white card box grain for horizontal grain
4	The left and right side pages need to reserve paper thickness gap after forming	Figure 2
5	The chamfering radius at both ends of the width need to add 2mm, and no straight edge is left after chamfering	Figure 3
6	The standard size of the certificate of conformity/finished instruction manual after molding is LxW (53x72); The inner width of the carton should be 10mm larger than the width W of the instruction manual; The folding method is one-way folding, and the final molding is two-fold; The products and manuals into the box reserved gap, easy to push the material into the box;	Figure 4
as shown
Figure 1	Figure 2	Figure 3
Figure 4
Summary: The above are the carton automation process requirements; According to the above process requirements and provide qualified samples to our technical confirmation; The final process is subject to the acceptance of the equipment (where the packing material is stored, the paper should be neat and undeformed, not be damp).

PRE

Intelligent cartoning machine (with glue spraying)

Intelligent cartoning machine (with automatic discharging)