Simple Assembly Machine RY-Simple-P1

Category

Intelligent Box Packing Machine Series

Keywords

Consultation

Products Describe

II. Performance Characteristics of the Simple Assembly Machine:

This simple assembly machine is designed by our company based on… Lighting appliance industry Custom-made through specialized research and development. Product , Application Scope LED Bulb half Automatically assembled finished product This simple assembly machine is a customized product specially developed and manufactured by our company according to the products in the lighting and electrical industry. It is used in semi-automatic assembly of LED bulbs. Its advantages are: high efficiency and labor saving.

◆This machine can be used independently, or integrated with laser marking equipment to form a complete production line.

The machine can be used alone, and the laser marking machine equipment can be used in conjunction to form a complete production line.

◆This machine can be customized to meet various user requirements, Each specification comes with one set. Mold , the mold will be customized according to the product height, on the large plate Institution Easy to adjust and debug 。 As shown in the figure: The machine can be equipped with a set of molds for each specification according to the different requirements of users. The molds will be customized according to the height of the product. The mechanism on the large plate is easy to adjust and debug. As shown in the figure:

III. Main Equipment Technical Parameters

3.1 Simple Assembly Machine Technical parameters Simple assembly machine technical parameters ：

Serial Number No	Equipment model	RY-Simple-P1	Remark
1	Device speed	1,000–1,200 units/hour 1000-1200/hour	Standard model
2	Bulb size	φ50-100
3	Motor Power	0.5 KW
4	Power Type	Single-phase 220V 50Hz
5	Machine noise	≤80dB
6	Gas source	0.5-0.8 MPa
7	Air consumption	20 m³/h
8	Dimensions	L1275W1180H1760mm
9	Total Weight	Approximately 100 kg

(The final interpretation right belongs to Rongyu)

3.2、Simple assembly machine configuration information:

Serial number No	Name	Brand	Note Remark
1	PLC	Delta
2	Human-Machine Interface (HMI)	Delta
3	Inverter	Delta
4	Electromagnetic valve The electromagnetic valve	AirTAC
5	cylinder	AirTAC
6	Motor	Taibang
7	Cutting machine	Coway

IV. Ball bubble material process requirements:

① The plastic‑encased aluminum and blister tray of the LED assembly machine must not have directional alignment slots, nor should they be fully snap‑locked (as shown in the figure below).

The plastic-coated aluminum and the bubble shell of the LED assembly machine cannot have a directional positioning card slot; and cannot be a full card (as shown below)

② The plastic‑encapsulated aluminum material shall not develop cracks when the pin‑pressing depth (torque) requirements are met.

The plastic-clad aluminum material requires that no cracks will occur under the requirements of the depth (torque) of the indentation needle;

PRE

Silicone Kit Labeling Integrated Machine RY-Silicone

Automatic Bagging Machine for Electronic Products