Intelligent cartoning machine (including instruction booklet folding)

Automatic folding and forming of the instruction manual — automatic forming of the paper box — automatic feeding of the product into the box — conveying the folded box out of the machine — completion.

Category

Intelligent Box Packing Machine Series

Keywords

Consultation

Products Describe

I. Equipment Plan Description:

Manual placement of products into the box-loading machine for material conveyance. --Photoelectric sensor detects the material--Automatic folding and shaping of the instruction manual--Automatic box forming - - Automatic folding and forming of the left page – automatic product feeding into the box – automatic folding and forming of the right page – automatic folding and forming of the large left and right flaps – the finished‑product conveyor belt transports the folded carton out of the machine – completion.

( Overall Scheme Diagram )

II. Main Equipment Technical Parameters

2.1 Intelligent Cartoning Machine Parameter Information:

Serial number	Device model	RY-Pro80-Z2	Note
1	Packaging speed	30-60 box / point	Depending on the product
2	Carton dimensions	L70-135 ×W 3 5- 70 ×H 35-70mm
3	Motor power	1.5KW
4	Power supply type	220 V 50 /60 Hertz
5	Applicable packaging materials	Grey cardboard, white cardboard, corrugated paper
6	air Source	0.6-0.8 Mpa
7	External dimensions	Approximately 340014001800 mm
8	Overall machine weight	Approximately 1200kg

(Reserve the right of final interpretation to Rongyu.)

2.2 Intelligent Cartoning Machine Configuration Information:

Serial number	Name	Brand /Specifications	Note
1	PLC	Delta
2	Touch screen	Delta
3	Variable frequency drive	Delta
4	Testing Electric eye	Omron
5	Switching power supply	Meanwell
6	Circuit breaker	Schneider
7	Button	Schneider
8	Contactor	Schneider
9	Relay module	Omron
10	Pneumatic components	AirTac /SMC/Domestic
11	Linear slide rail	Dinghan
12	Motor	Eastern Alliance

III. Process Requirements for Cartoning and Packaging Materials

Carton requirements
Serial number	Content	Note
1	The cardboard box is shown in the figure. L×W×H shared	Figure 1
2	Before gluing the cardboard box, it must meet > Pre-folded at 120 degrees, and must not exhibit adhesive residue after bonding. The indentation is pressed to its deepest point.
3	The corrugated cardboard box has a vertical grain. , the gray card and white cardboard have horizontal grain patterns;
4	After the left and right pages are formed, a gap equal to the paper thickness must be left.	Figure 2
5	The chamfer radius at both ends of the insert tab on the large folding flap of the carton equals the width of the insert tab plus… 2 mm; after fabrication, chamfering leaves no straight edges.	Figure 3
6	Paper requirements for the instruction manual; 70–80 g/m² 1/4 A4 (i.e. 105mm × 148mm ) 1/2 A4 (i.e. 210mm × 148mm ) The width when folded is less than the inner width of the carton. 5mm	Figure 4
Illustration
Figure 1	Figure 2	Figure 3
Figure 4
Summary: The foregoing constitutes the automated packaging‑material process requirements. Confirmation shall be based on these requirements and on the submission of qualified samples to our technical team for verification. The final process shall be determined upon equipment acceptance. (In the storage area for packaging materials, paper must remain dry, and incoming materials must be complete and free from deformation.)

PRE

Intelligent cartoning machine (including lamp holder liner)

Intelligent cartoning machine (including inner tray)