Intelligent cartoning machine (including automatic material feeding)

Equipment operation description: Manually place products into the automatic feeder; the feeder picks up the products and conveys them to the boxing machine’s hopper for continued transport; photoelectric sensors detect the presence of materials; the paper box is automatically formed; the left flap is automatically folded and shaped; the product is automatically pushed into the box; the right flap is automatically folded and shaped; the large left and right flaps are automatically folded and formed; finally, the finished‑box conveyor belt transports the fully assembled boxes out of the equipment, completing the process.

Category

Intelligent Box Packing Machine Series

Home Window

Product Center

Keywords

Consultation

Products Describe

Equipment Plan Description:

Manually place the product into the automatic unloading machine—pick up the product and feed it into the boxing machine’s hopper for continued conveyance—photoelectric sensors detect the material—automatically form the paper box—automatically fold and shape the left side panel—automatically push the product into the box—automatically fold and shape the right side panel—automatically fold and shape the large top and bottom flaps—finally, the finished‑box conveyor belt transports the boxed product out of the equipment—process complete.

( Overall Scheme Diagram )

Intelligent Cartoning Machine Parameter Data:

Serial number	Device model	R Y-Small80	Note
1	Packaging speed	30-60 box / point	It depends on the product.
2	Carton dimensions	L70-200×W25-80×H 11-80mm	long 100 adjustable wide 40 adjustable High 40 adjustable
3	Motor power	1.5KW
4	Power supply type	220 V 50 /60 Hz
5	Applicable packaging materials	Grey cardboard, white cardboard, corrugated paper
6	air Source	0.6-0.8 Mpa
7	External dimensions	Approximately 290014001700 mm
8	Overall machine weight	Approximately 1100kg

(Reserve the right of final interpretation to Rongyu.)

Intelligent Cartoning Machine Configuration Information:

Serial number	Name	Brand /Specification	Note
1	PLC	Delta
2	Touch screen	Delta
3	Inverter	Delta
4	Testing Electric eye	Omron
5	Switching power supply	Meanwell
6	Circuit breaker	Schneider
7	Button	Schneider
8	Contactor	Schneider
9	Relay module	Omron
10	Pneumatic components	AirTac /SMC/Domestic
11	Linear slide rail	Dinghan
12	Motor	Eastern Alliance

Packaging and Cartoning Process Requirements

Carton requirements
Serial number	Content	Note
1	The cardboard box is shown in the figure. L×W×H shared	Figure 1
2	Before gluing the cardboard box, it must meet > Pre-folded at 120 degrees, and no adhesive shall remain after bonding. The indentation is pressed to its deepest point.
3	The corrugated cardboard box has a vertical grain. , the gray card and white cardboard have horizontal grain patterns;
4	After the left and right pages are formed, a gap equal to the paper thickness must be left.	Figure 2
5	The chamfer radius at both ends of the insert tab on the large fold of the paper box equals the width of the insert tab plus… 2 mm; after fabrication, chamfering leaves no straight edges.	Figure 3
Illustration
Figure 1	Figure 2	Figure 3
Summary: The foregoing constitutes the automated carton‑making process requirements. These requirements shall prevail, and qualified samples must be provided to our technical team for confirmation. The final process shall be determined upon equipment acceptance. (In the packaging material storage area, paper must be kept dry, and incoming materials must be complete and free from deformation.)

PRE

Intelligent Cartoning Machine

Intelligent Cartoning Machine (including product manual)