Intelligent Cartoning Machine

Equipment Operation Description: Manually place products into the box‑packing machine; material is conveyed—photoelectric sensors detect the presence of materials—paper boxes are automatically formed—left side flaps are automatically folded and shaped—products are automatically pushed into the box—right side flaps are automatically folded and shaped—large left and right flaps are automatically folded and shaped—finally, a finished‑product conveyor belt transports the fully folded boxes out of the equipment.

Category

Intelligent Box Packing Machine Series

Home Window

Product Center

Keywords

Consultation

Products Describe

Equipment Plan Description:

Manual placement of products into the cartoning machine; material conveyance—photoelectric sensor detects the product—automatic forming of the paper box—automatic folding and shaping of the left flap—automatic feeding of the product into the box—automatic folding and shaping of the right flap—automatic folding and shaping of the large flaps on both sides—finished‑box conveyor belt transports the folded boxes out of the equipment—completion.

(Overall Scheme Diagram)

Main Equipment Technical Parameters

2.1 Parameter Data for the Intelligent Cartoning Machine:

Serial number	Device model	RY-Small80	Note
1	Packaging speed	30–60 boxes per minute	Depending on the product
2	Carton dimensions	L70-200×W25-80×H11-80mm	100 cm adjustable 40 cm wide, adjustable Height 40, adjustable
3	Motor power	1.5KW
4	Power supply type	220V 50/60Hz
5	Applicable packaging materials	Grey cardboard, white cardboard, corrugated paper
6	Air source	0.6-0.8 MPa
7	External dimensions	Approximately 290014001700 mm
8	Overall machine weight	Approximately 1,100 kg

(Reserve the right of final interpretation to Rongyu.)

Smart Cartoning Machine Configuration Information:

Serial number	Name	Brand/Specification	Note
1	PLC	Delta
2	Touch screen	Delta
3	Variable frequency drive	Delta
4	Photoelectric sensor	Omron
5	Switching power supply	Meanwell
6	Circuit breaker	Schneider
7	Button	Schneider
8	Contactor	Schneider
9	Relay module	Omron
10	Pneumatic components	AirTac/SMC/Chinese-made
11	Linear slide rail	Dinghan
12	Motor	East Kingdom

Packaging and Cartoning Process Requirements

Carton requirements
Serial number	Content	Note
1	The carton dimensions are L × W × H, as shown in the figure.	Figure 1
2	Prior to gluing, the carton must undergo a pre‑crease at a temperature exceeding 120°C, and no adhesive shall remain on the glued surface after assembly. The indentation is pressed to its deepest point.
3	Corrugated cardboard boxes have vertical grain, while grayboard and whiteboard boxes have horizontal grain.
4	After the left and right pages are formed, a gap equal to the paper thickness must be left.	Figure 2
5	For the large fold-over flap of the paper box, the chamfer radius at both ends of the tab shall be equal to the tab width plus 2 mm; after fabrication, the chamfers must not leave any straight edges.	Figure 3
Illustration
Figure 1	Figure 2	Figure 3
Summary: The foregoing constitutes the automated carton‑making process requirements. These requirements shall prevail, and qualified samples must be provided to our technical team for confirmation. The final process shall be determined upon equipment acceptance. (In the packaging material storage area, paper must be kept dry, and incoming materials must be complete and free from deformation.)

PRE

none

Intelligent cartoning machine (including automatic material feeding)