Simple assembly machine

Simple assembly machine can complete the automatic stamping of manual lamp cup semi-finished products/bubble shells, glue injection. The action process of covering the blister, the genuine product under the material.

Category

LED light source industry equipment

Keywords

Consultation

Products Describe

Equipment solution description：

Artificial lamp cup semi-finished product/bubble shell - automatic stamping - glue injection - put the bulb cover on - genuine blanking

二、Simple assembly machine equipment performance characteristics：

This simple assembly machine is a customized product specially developed and manufactured by our company according to the products in the lighting and electrical industry. It is used in semi-automatic assembly of LED bulbs. Its advantages are: high efficiency and labor saving.

◆The machine can be used alone, and the laser marking machine equipment can be used in conjunction to form a complete production line.

◆The machine can be equipped with a set of molds for each specification according to the different requirements of users. The molds will be customized according to the height of the product. The mechanism on the large plate is easy to adjust and debug. As shown in the figure:

三、Main equipment technical parameters

3.1Simple assembly machine technical parameters：

NO	Equipment model	RY-Simple-P1	Remark
1	device speed	1000-1200个/小时 1000-1200/hour	标准机型
2	Bulb size	φ50-100
3	Motor Power	0.5 KW
4	Power Type	220V 50Hz
5	machine noise	≤80dB
6	Gas source	0.5-0.8 Mpa
7	Air consumption	20m³/h
8	Dimensions	L1275W1180H1760mm
9	Total Weight	about100Kg

NO	Equipment Size	RY-Simple-P2	备注
1	Equipment Speed	1000-1200pcs/h	regular
2	Bulb type	bulbC37-A95	A bubble E27/B22 base mould universal, E14 mould separate;
3	Motor rate	0.5 KW
4	Power type	单相220V 50Hz
5	machine noise	≤80dB
6	Gas source	0.5-0.8 Mpa
7	Air consumption	20m³/h
8	Dimensions	L1275W1180H1760mm
9	Total Weight	about100Kg

序号	Equipment model	RY-Simple-P3	Remark
1	device speed	800-1000pcs/h
2	Bulb size	Tφ80-140	One set of moulds for one specification
3	Motor Power	0.5 KW
4	Power Type	单相220V 50Hz
5	machine noise	≤80dB
6	Gas source	0.5-0.8 Mpa
7	Air consumption	20m³/h
8	Dimensions	L1500W1670H1900mm
9	Total Weight	abput140Kg

(The final interpretation right belongs to Rongyu)

3.2、Simple assembly machine configuration information：

NO	name	brand	Remark
1	PLC	Delta
2	人机界面HMI	Delta
3	Frequency Inverter	Delta
4	The electromagnetic valve	AirTAC
5	cylinder	AirTAC
6	motor	Taibang
7	cutting machine	Coway

四、Ball bubble material process requirements：

①The plastic-coated aluminum and the bubble shell of the LED assembly machine cannot have a directional positioning card slot; and cannot be a full card

②The plastic-clad aluminum material requires that no cracks will occur under the requirements of the depth (torque) of the indentation needle;

PRE

Ring 10 station tester

GX53 assembly machine