Analysis of common failures of cartoning machines

05-15

Cartoning machine, as the equipment for post-packaging, is widely used in various industries because of its high degree of automation, efficiency improvement and manpower saving. The cartoning machine has been used for a long time, and there will inevitably be some minor faults. The editor of Rongyu Machinery will analyze the common faults of the cartoning machine with you based on years of repair experience. Hope to help you all.

Common faults of cartoning machine one

After the carton of the cartoning machine is sucked down, it will not form or pop out at the mouth of the box feeding template: 1. First check whether the carton is too hard. 2. Check whether the orientation of the guide rod for placing the carton and the box feeding template is not correct. 3. Check whether the small hook spring at the rear of the box delivery template is deformed. 4. Check whether the height of the suction head of the suction box and the track of the box delivery is correct.

Common faults of cartoning machine two

The carton of the cartoning machine cannot be sucked down: 1. Whether the carton is placed neatly. 2. Whether the cartons are pasted together. 3. Whether the air pressure of the suction head is normal.

Common faults of cartoning machine three

The conveyor belt of the cartoning machine is shut down or shut down in the open space: 1. Stop in the open space to check whether there is a shortage of materials, and automatically start up for replenishment. 2. Shut down and check whether the power supply including the power supply part, motor or governor is normal.

Common faults of cartoning machine four

The manual of the cartoning machine cannot be sucked down:

1. First check whether the instruction manual is deformed, causing the suction head to fail to suck.

2. Check whether the air of the suction head is parallel to the manual.

3. Whether the width scale of the manual paper is different, the error must be within 1mm. It is advisable to adjust the stacking position of the instructions to be 0.5mm different from the inner edge of the suction head when it rises to the highest position.

4. The movement time of the paper separating hook above the suction head of the origami machine is too early. Generally, the small hook should be inserted into the space between the paper and the paper before the suction head is about to descend. The adjustment of the height of the small hook is 0.5mm away from the suction head when it is in the highest position.

The above is the common fault analysis of the cartoning machine shared by Rongyu Machinery. Hope to help you in the usual repair and maintenance process. If you can't solve the problem, you can ask your supplier for help.